If you are considering buying a new plasma cutters, there are plenty of choices yet difficult to choose the best one. While you may be tempted to just go for the lowest price, keep in mind that you get what you pay for. To avoid this dilemma, we recommend to read this guide and review. It gives you insider information on how to choose the best plasma cutters for your needs and budget.
In this in-depth review guide, we will discuss about the best plasma cutters.
A Quick Comparison of Our Favorites
The Best plasma cutters
Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)
- 【Pilot Arc Function】This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
- 【Dual-Voltage 110/220V】Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
- 【Air Pressure & Air Compressor】The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
- 【Post Time Function】With post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
- 【Cutting Thickness】The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; [email protected] 220V 70 PSI.
Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display
- 【High Quality】Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Quality Consumables
- 【Portable Design】 Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle，It Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables.
- 【Dual Voltage】This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V-220V), Plug And Play In Different Environments, No External Conversion Plug Required
- 【Application】 This is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm.QA Has Video Operation Instructions
Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
- ★ - : Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- ★ & : Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ : The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
- ★ & : 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ : We offer a - , - - , please submit warranty registration form on our website. - customer service(via phone/email) is available to assist you.
Plasma Cutter, 50A Non-Touch Pilot Arc Inverter DC Inverter 120/240V Dual Voltage Cutting Machine With Intelligent Digital Display With Free Accessories
- - : Efficiently Cuts Through Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal. Better Cutting Quality And Longer Consumable Life.
- & : Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability Of Consumable Life. Lower Your Usage Cost. Compact Plasma Cutter Has A Handle For Portability And Use Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum.
- & : 10-50A DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. SUITABLE CUTTING For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost.
- : Power Supply, Plasma Cutting Torch, Ground Clamp, Pre-Installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.
- : Ensures The Plasma Cutter Has A Stable And Durable High Performance.★ : Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)
- 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc.
- 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment.
- 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting.
- 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa); Max cutting thickness is 10mm#60PSI( 0.6Mpa)); ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa)).
- 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine
- ️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
- ️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current.（Air Compressor Start Required)
- ️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
- ️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)
Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive
- ★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
- ★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
- ★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual（Air Compressor Start Required）
- ★Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
- ★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.
LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2" Clean Cut
- ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)
- ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.
- ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!
- ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.
- ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI.
- ✤ Machine come with 110V power plug.1 x 3meters Cutting torch, 1 x Earth clamp, 1 x Air filter, 1 x 1M Air Hose, 2 x Tip (Nozzle), 2 x Electrode, 1 x Manual.
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
The Video Review of Best plasma cutters
PLASMA CUTTING FOR BEGINNERS, PLASMA TIPS AND TRICKS
Plasma Cutter: https://xtremeplasma.ecwid.com/R-Tech-50amp-P50CNC-Plasma-Cutter-&-Hand-Torch-p401254684 Plasma ...
Our best overall plasma cutters, the Perception and the reviews helps assist to choose you the product better. We hope our reviews buyer guide of these plasma cutters will help you pick the perfect plasma cutters for you and your buying decision making.